Manufacturers & Exporters : Friction Screw Presses (Down-Stroke), Forging Screw Presses (Up-Stroke), Friction Screw Presses with Pneumatic Control, Power Presses H-Frame, Power Presses C-Frame, Power Press Pillar Type, Pneumatic Power Press, Friction Screw Press Manufacturer, Forging Screw Press Manufacturer, Screw Presses Manufacturer, Forging Presses, Hot Forging Presses, Power Press Manufacturer, Screw Forging Press, Mechanical Power Presses, Precision Power Presses, Power Press C Type, Cold Coining Presses, Heavy Duty Forging Screw Press, Hot Forming Presses, Cutting Presses, Piercing Power Press, Trimming Press, Drawing Press, Stamping Presses, Cold Forging Presses, Punching Presses, Bending Presses, Forging Machines, Screw Press Machine, Friction Leather Belts, Power Press with Pneumatic Clutch, Leather Belts for Friction Screw Press, Four Column Friction Screw Press for fire bricks, Friction Forging Screw Presses, cold forging press, forging hammer machines

PNEUMATIC POWER PRESS

These power presses are used for blanking, cutting, piercing, trimming, drawing, reducing, stamping, punching & bending. These Power presses cover the whole range of pressing and forming operations, and thus the customer is able to select the machine best suited to his requirements. The suitable press can be ascertained from a consideration of the purpose, the size of the production products, the material to be used and the required output. Power Presses what we are manufacture is of steel fabricated frame, using best raw materials that are tested for long life, efficiency and reliability. We also do stress relieving to all fabricated frames and follows standard practice of seasoning casting. Power press is equipped with an electro pneumatically operated plate friction clutch and brake combination. The pneumatic clutch has proved to be the most durable and, even when subjected to multi-shift operation. The clutch and brake permit the instantaneous stopping of ram at any point during the down-stroke.We also manufacture the customized Power presses in order to meet exact requirement of our customers from 10 ton to 1000 tons cap.

TECHNICAL SPECIFICATION

Capacity in Tons	PP-30	PP-50	PP-75	PP-100	PP-150	PP-200	PP-250	PP-300
Bed Size in mm	435x460	460x500	525x600	575x625	650x675	800x850	850x900	925x950
Dist. Bed to Ram	300	340	375	400	450	500	550	600
Punch Bore	32	40	45	50	55	63	65	70
Stroke Length	80	90	110	125	125	150	150	175
Ram Adjustment	25	35	35	35	50	50	50	50
Shut Height	185	210	250	275	300	300	350	400
Stroke Per Minute	60	60	50	45	40	35	35	35
Bore in Table	120	150	175	200	225	250	250	300
Power Required	3HP	5HP	7.5HP	10HP	15HP	20HP	25HP	30HP
RPM	1440	1440	1440	1440	1440	1440	1440	1440
Pulley Size	150	150	150	150	175	200	200	225
Air pressure for pneumatic clutch (Kgs/Cm2)	5.5 to 6	5.5 to 6	5.5 to 6	5.5 to 6	5.5 to 6	5.5 to 6	5.5 to 6	5.5 to 6

In view of continuously development, we reserve the right to modify the design and or dimensions without notice.

Frame :- The Power Press Frame is fracture-proof all welded single piece construction made from fine tested steel with suitable cross ribbings. The steel constructed frame is stress relieved for having long life, high efficiency, utility and reliability. The advantages of steel construction :-

a) Higher modulus of elasticity

b) Higher strength

c) Due to a) and b), smaller cross-sections, hence rigid frame

d) Absorb the heavy work load

Pneumatic Clutch & Brake :- Pneumatic Combination Clutch/Brake comprises of a clutch & spring applied disc brake which is air actuated. The Pneumatic clutch & brake linked with the fly wheel engages when the push button is pressed. The pneumatic clutch has proved to be the most durable and, even when subjected to multi-shift operation. The clutch and brake permit the instantaneous stopping of ram at any point during the down-stroke. The clutch is rigid and well supported. The clutch gives continuous strokes for mass production and have long operating times.

Crank Shaft :- Crank shaft is made from special alloy steel and is having large bearing surfaces for smooth running fitted in bronze bushes, finished to proper tolerances are provided for long life.

Gears :- The gears produced by our production units are able to fulfil all the standards. We use the best quality of raw materials for these gears. The team which is accountable for introspecting the quality standard of the manufactured gears, is comprised of experts having pool of knowledge in this respective fields.

Flywheel :- Flywheel is made from high grade cast iron. The Fly wheel are characterized by the fact that the fly wheel connected to accelerated at the start of working stroke. The fly wheel provides a predetermined amount of energy to the job and used for storing and releasing adequate energy for the pressing operations, and properly balanced for smooth running.

Lubrication :- The Purpose of the lubrication is to provide a film to ease the movement of the material over the tool and to reduce wear and tear on the latter. The lubricant is often required to cool the tool in addition. The lubricant is applied by hand pump or Motorised pump

Table & Ram :- Table and Ram are made of high grade heavy duty cast iron & properly seasoned. They are perfectly aligned, to each other to obtain high accuracy & precision press operation.

Optional Accessories	Standard Accessories
Motorised Lubrication Pump	Pneumatic clutch
Die Cushion	Motor pulley
Anti vibration mounts	Slide adjustable Spanner
Hydraulic overload safety device	Fly Wheel guard
Pneumatic feeder	Gear guard
Anti repeat Safety Device	V-Belts
Electric motor	Air filter
Tie Rods	Control panel
Foundation bolts	Two hand push button control station
Special Electric controls	Lubrication pump for all moving parts
Hand safety sensors	Bronze metal bushes
PLC controlled system
Electronic stroke counter

Call Us

Email

PNEUMATIC POWER PRESS

TECHNICAL SPECIFICATION

QUICK LINK

SOCIAL MEDIA

GET IN TOUCH

REACH US